INBROLLY - HOME

Welcome to INBROLLY! We are open! That's why we use open systems and open solutions. We offer customization of our products according to your needs. Contact us also for wholesale pricing or custom module or firmware development.

Discount for Czechoslovak state day

We are celebrating the anniversary of the founding of the independent Czechoslovak state on October 28, 1918. Until November 28, we are offering a 20% discount on all orders. Use coupon code 1918 to apply the discount.

CPU module PI-CPUF407

Module in format of Rasberry PI with STM32F407, Ethernet, Wi-Fi, 2x USB and MicroSD card

The PI family expands with CAN FD and RS-232/485/422 modules

There are two new modules for Raspberry Pi or PI-CPUF407. One is the PI-CAN module with CAN FD interface with speeds up to 8 Mbit/s and the other is the PI-RSX combination module with optional RS-232, RS-485 or RS-422 interfaces. These are stackable HAT+ modules with integrated EEPROM for module detection and both with LED activity indication.

INBROLLY launches a range of DIN-IPC controllers for industrial and IoT applications

Mountable to low profile distribution boards with the same profile as conventional circuit breakers

IPC-CPUF407 Automation Controller

IPC-CPUF407 is a DIN-IPC series controller for industrial and IoT applications. Its advantage is that it can be mounted in low profile distribution boards with the same profile as conventional circuit breakers. It includes the STM32F407 microcontroller, which supports Ethernet network interface, SDIO is used for Wi-Fi connectivity, as well as a wide range of other interfaces. It is therefore suitable for devices requiring either wired or wireless internet connectivity for data acquisition and control.

The world's first power bank rechargeable from a bicycle dynamo

Electric bicycles costing tens of thousands are in vogue. They carry a large battery that first needs to be recharged from a socket and then you can set off on a route of just a few dozen kilometres. Then you have to find a socket again and recharge it with electricity produced from non-organic sources. INBROLLY goes the other way. For enthusiasts who set out on their own for long periods in the countryside, on expedition trips, on bikepacking, with little or no contact from civilization. You certainly won't get an e-bike here, but navigation and a cell phone are now an important part of the kit. The last contact with civilization. And there is nowhere to charge these devices. And it is for this purpose that we present the world's first powerbank that can be recharged from a bicycle dynamo - DYNABANK.

News

Cheaper module PI-CPUF303 with STM32F303 microcontroler for basic applications

The PI module family has grown with the addition of another processor module with an STM32F303 microcontroller, which is suitable for basic control or reading of analog or digital sensors. The processor runs at a frequency of 72 MHz, has 128 kB of FLASH memory, 32 kB of RAM, and 8 kB of faster CCMRAM memory, and also allows to run FreeRTOS. Of course, it also supports our peripheral submodules.

Meassuring EMI with LISN 5 and LISN CM/DM

When testing developed products, EMI emissions are an important parameter. Testing in accredited laboratories is expensive, so pre-certification tests are performed to verify emissions. This requires an EMI receiver or spectrum analyzer, as well as a LISN (line impedance stabilization network).

Using PI-RSX module on Raspberry Pi

The PI-RSX module allows you to add RS-232, RS-485, or RS-422 interfaces to your Raspberry Pi. Everything is contained in a single module, and the interface type is selected using jumpers on the PCB. Let's take a look at how to use it in Python.

Using PI-CAN module on Raspberry Pi

The PI-CAN module is a module with a galvanically isolated CAN FD interface based on the MCP2518FD controller with the MCP2544FD interface. Support for PI-CPUF407 is included in the sample application on GitLab. Let's also take a look at how to get it running on Raspberry OS.

DYNABANK now also in a smaller version with capacity 5 000 mAh

The DYNABANK power bank for cycling, rechargeable from a hub dynamo, is now also available in a 5,000 mAh version called DYNABANK 5, which is smaller in size and lighter in weight than the original DYNABANK 10 version with a 10,000 mAh capacity.

We use cookies to deliver and enhance the quality of our services.